10-1, Jalan OP 1/3,
Pusat Perdagangan One Puchong,
47160 Puchong,
Selangor, Malaysia.
+603-8061 0711
AIRMAX MARKETING SDN BHD
10-1, Jalan OP 1/3,
Pusat Perdagangan One Puchong,
47160 Puchong,
Selangor, Malaysia.
10-1, Jalan OP 1/3,
Pusat Perdagangan One Puchong,
47160 Puchong,
Selangor, Malaysia.
EB 251
| Previous | 7 / 8 | Next |
| Model No. | EB 251-5 |
| Backingplate Max. | 6'' (148mm) |
| Foam/woolpad Standard Max. |
6'' (150mm) 7'' (180mm) |
| No Load Speed | 700 - 1500/m in |
| Battery Voltage | 18 V |
| Weight (without battery) | 1.70 kgs |
| Accessories Included : | 5'' Backing Plate Side Handle |
| Model No. | EB 251-6 |
| Backingplate Max. | 6'' (148mm) |
| Foam/woolpad Standard Max. |
6'' (150mm) 7'' (180mm) |
| No Load Speed | 700 - 1500/m in |
| Battery Voltage | 18 V |
| Weight (without battery) | 1.73 kgs |
| Accessories Included : |
5'' Backing Plate Side Handle Adaptor 5'' to 6'' |
Rotary Polisher EB251 is professiionally designed and manufactured for automotive and industrial polishing works.
- BLDC Brushless Motor: With greater efficiency and a longer service life.
- Double-Deduction Gearing: To provide dual torque output, enables the polishing with low speed and high torque, e. g. for heat-sensitive surfaces.
- Stepless Speed Setting: Preset the maximum speed between 700-1500/ min.
- Accelerator Switch: Pressing the switch trigger increases the speed. The speed can be regulated steplessly between 300 rpm and the speed preset on the adjusting wheel, enable the operator to control the speed precisely and freely.
- Light Weight: Only 1.7kgs (no battery), well-balanced distribution, less fatigue for the long time polishing work.
- Constant Speed Output: The preseted speed remains constant through electronic control to ensure a uniform polishing speed even when under load.
- Smooth Start-up: The electronically controlled smooth start-up ensures safety and reduces splash of polishing compound.
- Overload Current Limiting: Current limiting prevents excessive current consumption under extreme overload, which can lead to a decrease in the motor speed. The motor restarts after the on/off switch trigger is released and re-pressed.